Original Factory Assembling to Uruguay Manufacturer

Short Description:

    Equipment CNC stamping/punching machine, CNC bending machine, TruLaser 3070 cutting machine, 5~250 tons punching machines, welding machine, polish machines Processed material stainless steel, copper, carbon steel (according to customer’s requirement) Surface treatment Hot galvanized, polishing, chrome/zinc/nickel plating, powder coating, anodize… Making process Laser cutting, Stamping, deep drawing, bending, punching ,threading, welding, tapping, riveti...


Product Detail

Product Tags

Related Video

Feedback (2)

We pursue the management tenet of "Quality is superior, Service is supreme, Reputation is first", and will sincerely create and share success with all clients for CNC Milling Service , Laser Cutting Metal , CNC Milling Service , Customers' reward and fulfillment are usually our biggest objective. Please make contact with us. Give us a probability, provide you with a surprise.
Original Factory Assembling to Uruguay Manufacturer Detail:

 

 

Equipment

CNC stamping/punching machine, CNC bending machine, TruLaser 3070 cutting machine, 5~250 tons punching machines, welding machine, polish machines

Processed material

stainless steel, copper, carbon steel (according to customer’s requirement)

Surface treatment

Hot galvanized, polishing, chrome/zinc/nickel plating, powder coating, anodize…

Making process

Laser cutting, Stamping, deep drawing, bending, punching ,threading, welding, tapping, riveting, grinding

Size

According to customer’s designing & drawings

Thickness

0.5mm ~12mm, or other special available

Standard

ANSI. API.BS.DIN.JIS.GB.etc

R&D

We support customer R&D make the file or improve the design if you needed

Inspection

IQC, IPQC,FQC,QA

Mould

Depend on customer’s require to make the mould.

Sample confirmation

Before start mass production we will send the pre-production samples to customer for confirmation. We will modify the mould until customer satisfied.

Products Scope

Furniture hardware, electronic hardware, construction hardware, sheet metal processing, machinery parts, hydraulic fitting

Packing

According to customer’s requirements

Certificate

ISO 9001, ROHS

 

     


Product detail pictures:

Original Factory
 Assembling to Uruguay Manufacturer detail pictures

Original Factory
 Assembling to Uruguay Manufacturer detail pictures

Original Factory
 Assembling to Uruguay Manufacturer detail pictures

Original Factory
 Assembling to Uruguay Manufacturer detail pictures


All we do is often involved with our tenet " Purchaser to start with, Rely on initially, devoting over the food stuff packaging and environmental defense for Original Factory Assembling to Uruguay Manufacturer, The product will supply to all over the world, such as: Cambodia , Mexico , Angola , Although continuous opportunity, we have now now developed serious a friendly relationship with many oversea merchants, such as ones through Virginia. We securely assume that the merchandise regarding t shirt printer machine is often good through a great number of having its good quality and also cost.


  • From http://www.kevincaron.com – Artist Kevin Caron shows how to make perfect holes of various sizes in metal and wood ….

    In response to a question about how he cut the holes in the steel wings of a private art commission without any discoloration or roughness, Kevin shows how to use a hole saw. First he shows the attachment that has a pilot drill to help get your hole started. The attachment has a locking mechanism with pins that lock into the holes in the back of the hole saw to keep everything together. You screw the locking mechanism into the hole saw, line up the holes and screw it down so everything locks together. The hole saw has a bimetal cutting surface that dissipates heat well while staying sharp. Hole saws come in lots of different sizes, too. Caron shows some of the ones he has, from 1/2″ to 7/8″ to 3″ to 4″. You can buy them as a set, but the sets he’s seen only go from about 1/2″ to 3/4″ or require a big case to store them all in – hole saws come as large as 6″, 7′, 8″ and 10″. The smaller diameter hole saws can be used in a handheld drill or a drill press, but the bigger ones perform better in a drill press because they can pull the metal or wood loose. With hole saws larger than 1-1/2″ Caron uses a drill press, clamping down the material on the drill press table. You can also buy hole saws individually. All of his came from Home Depot. Caron has had good luck with the Milwaukee brand. There are also hole saws made of different types of metal and adjustable ones. He recommends going online and researching “hole saws” to see what is available. As for using them to create a project, he laid out his bottom row along the straight edge, then measured in and across. Then he cut some 4″ diameter circles out of paper and laid them on the metal so he could get his spacing right. Next he took his spring-loaded center punch and punched right in the center of the paper pattern. Caron takes a moment to explain how the spring-loaded center punch works. You put it up against the metal and press down. You hear a little “snap,” which is the spring releasing a small hammer inside, which makes a dimple in the metal. You can come back with a traditional center punch and a hammer if you want to create a bigger mark, but using this spring-loaded center punch seems to do the job well enough for the hole saw’s pilot drill to find the center point. (Sometimes he does it twice to deepen the dimple.) Finally, he demonstrates how to do it. He puts a hole saw on his drill press, center punches a piece of aluminum, clamps the metal to the table, and drills a pilot hole through the aluminum. He then lowers the hole saw and cuts right through the metal. Aluminum cuts more easily than steel; he uses cutting fluid when using a hole saw on steel. When he drilled the wings for his art commission, he clamped a large piece of wood to the drill press table, then clamped the metal to the wood to keep everything straight, and went a little more slowly. Caron has cut 1/4″ and even 1/2″ steel using the drill press and a hole saw. For more how-to videos, visit http://www.kevincaron.com To see the art commission mentioned in this video, visit http://www.kevincaron.com/art_detail/lady_bugme.html



    Quickly design weldments, sheet Metal, and multi-body parts and increase standardization.

    - Save time and automate outputs for manufacturing
    - For Weldments—Access overall dimensions of the part bounding box for BOM, cut list, or annotations
    - For Sheet Metal—Set and view insertion points for forming tools to determine the precise location of the forming tool relative to the part
    - Multi-Body Parts—Use library features on multi-body parts

    Get the full details about SolidWorks 2013 on our website–no registration required! http://www.solidworks.com/launch/solidworks-2013-overview.htm?scid=sm_yt_launch13_weldments

    The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.



















    5 Stars By Linda 2015-12-30 16:23
    The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!





















    5 Stars By Alex 2016-2-22 12:22

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    WhatsApp Online Chat !